Flow Switch with Housing Nickel Plated Brass Union Nut 3/4 BSPP Adjustable Strength Magnetic Switch

• Customization: Available
• IP Rating: IP65
• Certification: RoHS, ISO9001, CE
• Model NO.: R1V
• Type: Infrared Water
• Media Type: Liquid
• Selling Units: Single Item
• Operating Temperature: 5 To100c
• Material: Plastic
• Calibration: Low Span End:3gr
• Contact Form: Spdt
• Electric Contact Type: Normally Open,Closes by Flow Rise
• Nominal Pressure at 20c: 2,5MPa Pn25
• Application: Water Pump Control,Flow Sensor
• Main Housing Material: Brass
• Specification: 8.5X3.2X17.1cm
• Trademark: Ultimheat
• Origin: Guangdong, China
• Production Capacity: 50000 Piece/Pieces Per Year
• Package Size: 9.00cm * 4.00cm * 17.00cm
• Package Gross Weight: 0.250kg

Product Description

Product Information

Main uses: General application in flow detection. Recommended mounting position is on horizontal pipes, but can be mounted in any position. For liquids flow detection on dia. 15 to 100mm pipes. Body and union nut in brass for improved mechanical strength and pressure resistance. Connection box with terminal block or connectors, and detection point adjustment screw

Functional principle:Balanced magnetic pallet mounted perpendicular to the flow and activating a reed switch through the wall. The return of the pallet is by made by magnetic action, without spring. No seal or liquid can pass between the piping system and the electrical contact.Usable for industrial applications in non-corrosive liquids. Must not be used for liquids containing magnetic particles or high viscosity liquids, which block the movement of the pallet. Adjustment:

- By cleaving the paddle

- Fine adjustment by screw driver on internal dial

Paddle shaft: Titanium, providing an outstanding corrosion resistance, and improved mechanical live

Main housing material: Brass

Paddle: Polypropylene, 15 mm width, with 4 sections, numbered 1 to 4, can be cleaved for adjustment to pipe size
Pipe mounting: Nickel plated brass union nut, ¾" BSPP, mounting on ¾" BSPP male thread with gasket. Recommended torque: 10±1Nm
Gasket: NBR

Electrical rating: Max 1A, Max 70W, Max 250V, resistive load. Use on inductive circuits reduces electrical rating. We recommend to protect the reed switch with contact protection device when used in inductive loads

Electric contact type: Normally open, closes by flow rise

Liquids compatibility: For use with clean water and liquids without magnetic particles and without chemical incompatibility with brass, PPO and titanium

Nominal pressure at 20°C: 2,5 MPa (PN25)

Liquids temperature range: 5 to 100°C (Do not withstand water freezing inside pipe)

Ambient temperature range: 5 to 80°C

Ingress protection: IP65

Calibration tolerances: +/-15% (on paddle operating force at end of paddle 1)

Electrical connection:

Standard:

IP64 connection box, with screw terminals connection block, M16×1.5 ISO cable gland

Options:

- Connection box with EN17530-803-A (DIN43650-A) connector

- Connection box with IEC947-5-2 M12×1 4 pins connector
Installation instructions:

- Check carefully the paddle orientation: The arrow on housing must be exactly parallel to the pipe

- A 5 mm minimum gap must be respected between end of the paddle and tube wall opposite to the fitting.

- We recommend the use of nozzles of length less than or equal to 18mm between the gasket seat and the inside of the tube and with an inner diameter greater than or equal to 13.5 mm, to avoid blocking of the pallet

Accessories: ¾" male PVC saddles for DN40 to DN100 (OD) PVC pipes, and other fittings: see section 8 of this catalogue.

Important notice: In the case of plastic pipes (PVC, PE), the DN (nominal diameter) corresponds to the outside diameter and wall thickness is variable depending on the application. This must be taken into account to avoid blocking the paddle. In the case of metal pipes, the inner diameter corresponds to the DN. Flow values data are for tubes whose internal diameter corresponds to DN.

Calibration (Calibration force ±15%, measured at end of paddle N°1)	Waterproof connection box with M16×1.5 cable gland	Waterproof connection box with 4 pins, M12×1 IEC947-5-2 connector	Waterproof connection box with DIN 43650-A Connector
Low span end: 3gr	R1V636680G35N00C	R1V636680G35N00L	R1V636680G35N00D
Middle span: 7gr	R1V676680G35N00C	R1V676680G35N00L	R1V676680G35N00D
High span end: 14gr	R1V6E6680G35N00C	R1V6E6680G35N00L	R1V6E6680G35N00D

Our Advantages

Product Display

Recommend Products

Exhibitions

Certifications

Company Profile

JPCI Controls originated from the French family-owned company founded in 1972, our company was founded in 2000, headquartered in Gaoming District, Foshan City, Guangdong Province, China, which is specialized in the design and production of mechanical thermostats, safety devices and electric heating systems for domestic and industrial use. JPCI owns an internationally renowned brand, ULTIMHEAT, and has a subsidiary in Lyon, France.After more than 50 years of development, JPCI has become a research and development enterprise which is deeply exploring the international market.
 

JPCI Controls covers an area of 30,000 square meters, has more than 300 employees, including 30 professional R & D and laboratory employees, and produces more than 6 million products per year, with more than 10,000 product models. Our production has achieved full vertical integration to ensure quality control at each stage, our company has more than 1000 sets of testing equipment such as ultraviolet aging testing machine, motor loading machine, hydraulic hi-pot bursting testing machine to strictly monitor product quality.
 

JPCI Controls has always adhered to the values of innovation, listening, responding and continuous improvement to ensure that products can achieve the best quality. JPCI holds 250 patents and applies for an average of 20 patents per year. Won the national high-tech enterprises and passed the system certification ISO9001, ISO14001, ISO45001; It has a 750 self-built laboratory and has passed the ISO17025 laboratory certification of TUV&UL.

 

JPCI Controls is driven by innovation, guaranteed by quality, and takes environmental protection as its responsibilitylooking forward to working with you to create a better future.