Stainless Steel Water IBC Immersion Heater Temperature Electric Power Resistance Heating Element

Product Description

Product Description

Industrial Stainless Steel Water IBC Immersion Heater Temperature Control Electric Power Resistance Heating Element Component

Specification

item	value
place of origin	China
brand name	ULTIMHEAT, JPCI
model number	immersion heater

Selling Point

These immersion heaters are mounted on the filling hole of the bulk containers of 1000 liters or more. They simply land on this hole, thanks to a stainless steel cup that covers the thread, while maintaining a connection to atmospheric pressure. Their long non-heating part makes it possible to position the heating coil at the bottom of the container. The surface load of the heating element is 3W/cm², so that it can be used in aqueous liquids as well as in oils and greases.

The stainless steel construction of the housing and of the heating element allows use in industrial and food processing environments. In the internal access models the IP69K ingress protection allows the washing with hot water under pressure. The temperature control is done in the center of the heating coil. A safety is installed on the top of the coil,

to automatically turn off the heating when the decrease in the level of the heated product puts the coil in contact with the air.

These immersion heaters can be used alone in reheating, with or without insulating jacket, or in addition to heating jackets, in the latter case, they greatly reduce the heating time.

Fitting material: 304 stainless steel cup, dia. 170mm

Enclosure: 125mm x 125mm, 85mm height, 304 stainless steel. Silicone gasket. Stainless steel cover screws.

Ingress protection class with outside access: IP54

Ingress protection class with inside access: IP69K

Temperature control: by 30-90°C (85-195°F) bulb and capillary thermostat. Other temperature ranges available. See options hereunder.

Dry run safety: By manual reset bulb and capillary thermostat, fail safe, controlling the heating element surface temperature

Cable gland: M25, PA66.

Thermowell: Two thermowells in AISI304, dia.10mm x 8.4mm for temperature control and dry run safety.

Power supply connection: Rubber insulated cord, 3x1.5mm², with euro plug. Ul plug on request.

Immersed zone: 800mm.

Surface load: 3 W/cm², others values on request.

Voltage: Single pole 230V

Standard equipment:- Adjustable thermostat - Large size (dia. 16mm) green and red LED pilot lights, on the enclosure side- Dry run manual reset safety: preset at 100°C (212°F).

Variants on request: - Internal thermostat adjustment and manual reset access under screwed M25 cap.- Thermostat ranges 4-40°C (40-105°F), 0-60°C (30-140°F) or 30-110°C (85-230°F)- Other dry-run safety temperature setting.

Our Services

Company Information

    JPCI Controls originated from the French family-owned company founded in 1972, our company was founded in 2000, headquartered in Gaoming District, Foshan City, Guangdong Province, China, which is specialized in the design and production of mechanical thermostats, safety devices and electric heating systems for domestic and industrial use. JPCI owns an internationally renowned brand, ULTIMHEAT, and has a subsidiary in Lyon, France.After more than 50 years of development, JPCI has become a research and development enterprise which is deeply exploring the international market.

 

    JPCI Controls covers an area of 30,000 square meters, has more than 300 employees, including 30 professional R & D and laboratory employees, and produces more than 6 million products per year, with more than 10,000 product models. Our production has achieved full vertical integration to ensure quality control at each stage, our company has more than 1000 sets of testing equipment such as ultraviolet aging testing machine, motor loading machine, hydraulic hi-pot bursting testing machine to strictly monitor product quality.

 

    JPCI Controls has always adhered to the values of innovation, listening, responding and continuous improvement to ensure that products can achieve the best quality. JPCI holds 250 patents and applies for an average of 20 patents per year. Won the national high-tech enterprises and passed the system certification ISO9001, ISO14001, ISO45001; It has a 750 square meter self-built laboratory and has passed the ISO17025 laboratory certification of TUV&UL.

JPCI Controls is driven by innovation, guaranteed by quality, and takes environmental protection as its responsibility,looking forward to working with you to create a better future.

Certifications

Exhibitions

FAQ

Q:Where is your factory located? Can I conduct a factory audit?
Our factory is located at No. 10 Pengshan Road, Gaoming District, Foshan City, Guangdong Province, China. We have two manufacturing plants covering an area of 30,000 m2. Of course, you can conduct a factory audit. You are welcome to visit us at any time.

Q:What pre-sales and after-sales services do you offer?
Our pre-sales services include discussing product parameter details and product drawings. If customization is required, we will arrange for engineers to connect with you. We will also discuss price, delivery methods, delivery times, and logistics with you.After-sales services include communication to understand production batches and delivery times. We will not be responsible for issues caused by improper operation. If it is our fault, our after-sales service can provide exchange services, and the warranty period for products is calculated as one year from the date of delivery.

Q:Can I customize products? What is the customization process?
Yes, we can customize products, and we have R&D engineers to assist you. The customization process is as follows: determine product parameters -> make product drawings -> confirm the prices of products and related molds -> make 3D drawings of products ->make samples -> test various data -> ship.

Q:What is your sample policy?
We support chargeable samples, and the logistics costs will be determined based on the number of samples; we can discuss the specific costs in detail.

Q:Can I place a small batch order?
Yes, we support small batch orders. Most products allow orders of 5 to 10 pcs for sample testing. Additionally, depending on the product, we support small batch orders ranging from 30 to 500 pcs.

Q:What is your delivery time?
Different products have different delivery times. For small orders with products in stock, we can generally deliver within 7 to 15 days. The specifics will be communicated during the pre-sales service.