Flow Switch Ultra Short Paddle for Small Pipes Gravity Pullback Reed Switch Contact

• Customization: Available
• IP Rating: IP65
• Certification: RoHS, ISO9001, CE
• Model NO.: R1L
• Type: Infrared Water
• Media Type: Liquid
• Operating Temperature: 5 to 80c
• Selling Units: Single Item
• Warranty: 1year
• Paddle Shaft: Titanium
• Flow Rate: Optional
• Electrical Rating: Max.1A Max 70W Max 250V
• Voltage: 250V
• Application: Flow Detection
• Main Housing Material: Polypropylene
• Specification: 3X3X4.8cm
• Trademark: Ultimheat
• Origin: Guangdong, China
• Production Capacity: 50000 Piece/Pieces Per Year
• Package Size: 3.00cm * 3.00cm * 5.00cm
• Package Gross Weight: 0.250kg

Product Description

Product Information

Main uses: The most simple and price effective flow switch of the range. Used for water flow detection on small size
water pipes. CONTACT OPENS BY FLOW RISE.
Functional principle:
Balanced magnetic pallet mounted perpendicular to the flow and activating a reed switch through the wall. The return
of the pallet is by gravity, without spring. No seal or liquid can pass between the piping system and the electrical
contact. Suitable for corrosive water pools and spas and salination chlorination and bromination systems. Not be used
for water containing magnetic particles or high viscosity liquids, which block the movement of the pallet.
Main housing material: Polypropylene, resistant to ozone and water disinfection products, usable with potable water.
Paddle: Polypropylene, 18mm width
Paddle shaft: Titanium, providing an outstanding corrosion resistance, and improved mechanical live
Electrical rating: Max 1A, Max 70W, Max 250V, resistive load. Use on inductive circuits reduces electrical rating. We
recommend to protect the reed switch with contact protection device when used in inductive loads
Electric contact type: Normally close, open by flow rise
Liquids compatibility: For use with clean water and liquids without magnetic particles and without chemical
incompatibility with polypropylene
Nominal pressure at 20°C: 1MPa (PN10)
Nominal diameter: Usually used on 25 to 32 mm internal diameter pipes.
The paddle is not cleavable.
Mandatory mounting position: On vertical pipes, with horizontal flow switch axis, and paddle upside. Upstream flow
only.
Water pipe connection: On female ½" fitting.
On the type with BSPP thread, a NBR gasket is supplied with the product. On the type with NPT thread, thread sealant
must be used.
Recommended torque: 7Nm
Liquids temperature range: 5 to 80°C
Ambient temperature range: 5 to 50°C
Ingress protection: IP65
Electrical connection: 2 × AWG24 (0.2mm²) cable, PVC insulation, T80°, style UL2464.
Installation instructions:- Check carefully the paddle orientation: The arrow on housing must be exactly parallel to the pipe - A
5 mm minimum gap must be respected between end of the paddle and tube wall opposite to the fitting.- We recommend the use of
nozzles of length less than or equal to 18mm between the gasket seat and the inside of
the tube and with an inner diameter greater than or equal to 20 mm, to avoid blocking of the pallet
Accessories: ½" PVC saddles for DN40 to DN100 (OD) PVC pipes, and other fittings: see section 8 of this catalogue.
Options: cable with connector or terminals, other cable length.

Thread	500mm Cable length	1m Cable length	2m Cable length
½" BSPP	R1L611536F45P050	R1L611536F45P100	R1L611536F45P200
½" NPT	R1G611534F25P050	R1G611534F25P100	R1G611534F25P200

Our Advantages

Product Display

Recommend Products

Exhibitions

Certifications

Company Profile

JPCI Controls originated from the French family-owned company founded in 1972, our company was founded in 2000, headquartered in Gaoming District, Foshan City, Guangdong Province, China, which is specialized in the design and production of mechanical thermostats, safety devices and electric heating systems for domestic and industrial use. JPCI owns an internationally renowned brand, ULTIMHEAT, and has a subsidiary in Lyon, France.After more than 50 years of development, JPCI has become a research and development enterprise which is deeply exploring the international market.
 

JPCI Controls covers an area of 30,000 square meters, has more than 300 employees, including 30 professional R & D and laboratory employees, and produces more than 6 million products per year, with more than 10,000 product models. Our production has achieved full vertical integration to ensure quality control at each stage, our company has more than 1000 sets of testing equipment such as ultraviolet aging testing machine, motor loading machine, hydraulic hi-pot bursting testing machine to strictly monitor product quality.
 

JPCI Controls has always adhered to the values of innovation, listening, responding and continuous improvement to ensure that products can achieve the best quality. JPCI holds 250 patents and applies for an average of 20 patents per year. Won the national high-tech enterprises and passed the system certification ISO9001, ISO14001, ISO45001; It has a 750 self-built laboratory and has passed the ISO17025 laboratory certification of TUV&UL.

 

JPCI Controls is driven by innovation, guaranteed by quality, and takes environmental protection as its responsibilitylooking forward to working with you to create a better future.