Flow Switch Reed Adjustable Paddles Corrosion Resistant Non Polluting

• Customization: Available
• IP Rating: IP65
• Certification: RoHS, ISO9001, CE
• Model NO.: R1Z
• Type: Infrared Water
• Media Type: Liquid
• Cable: 2m
• Flow Rate: 4 to 235
• Operating Temperature: 5 to 95c
• Selling Units: Single Item
• Specification: 3X2X14cm
• Trademark: Ultimheat
• Origin: Guangdong, China
• Production Capacity: 50000 Piece/Pieces Per Year
• Package Size: 3.00cm * 2.00cm * 14.00cm
• Package Gross Weight: 0.500kg

Product Description

Product Information

Main uses: Large quantities applications in flow detection in low voltage electronic circuits. The most economical model.Recommended mounting position is on horizontal pipes. Can be mounted in any position with a small drift in the calibration because of the paddle weight. Can be used on 15 to 100mm diameter water pipes.
Functional principle: Balanced magnetic pallet mounted perpendicular to the flow and activating a reed switch through the wall.
The return of the paddle is made by magnetic action,without spring. No seal or liquid can pass between the piping system and the electrical contact. Suitable for corrosive water pools and spas and salination chlorination and bromination systems. Must not be used for water containing magnetic particles or high viscosity liquids, which block the movement of the paddle.
Paddle shaft: Titanium (Patented), provides an outstanding corrosion resistance (contrary to stainless steel), does not break(contrary to ceramic shafts models), and improved mechanical live. Suitable for corrosive water pools and spas and salination chlorination and bromination systems.
Main housing material: PPO, fiber glass reinforced for improved pressure resistance, usable with potable water.
Paddle: PPO, 12 mm width, can be cleaved into 4 sections numbered 1 to 4 for pipe diameter adjustment.
Pipe mounting: Fiber glass reinforced union nut, ¾" BSPP,mounting on ¾" BSPP male fitting with gasket. Recommended torque: 7±1Nm.
Gasket: NBR. (A special silicone gasket, available on request, has been developed for water with metallic particles to limit their access to magnetic parts).
Electrical rating: Max 0.5A, Max 10VA, Max 80V, resistive load. Use on inductive circuits reduces electrical rating. We recommend to protect the reed switch with contact protection device when used in inductive loads.

Electric contact type: Normally open, closes by flow rise.
Liquid compatibility: For use with clean water and liquids without magnetic particles and without chemical incompatibility with PPO and titanium.
Nominal pressure at 20°C: 0.6MPa (PN6).
Liquid temperature range: 5 to 95°C.
Ambient temperature range: 5 to 80°C.
Ingress protection: IP65.
Calibration tolerances: +/-15%
Electrical connection: 2 × AWG26 (0.15mm²) cable, PVC insulation, T80°C.
Installation instructions:
- Check carefully the paddle orientation: The arrow on housing must be exactly parallel to the pipe.
- A 4 to 5 mm minimum gap must be respected between end of the paddle and tube wall opposite to the fitting.
- We recommend the use of nozzles of length less than or equal to 18mm between the gasket seat and the inside of the tube and with an inner diameter greater than or equal to 13.5 mm, to avoid blocking of the paddle
Accessories: ¾" male PVC saddles for DN40 to DN100 (Outside dimeter) PVC pipes, and other fittings: see section 8 of this catalogue.
Options (MOQ apply): cable with connector or terminals, other cable length,
Important notice: In the case of plastic pipes (PVC, PE), the DN (nominal diameter) corresponds to the outside diameter and wall thickness is variable depending on the application. This must be taken into account to avoid blocking the paddle. In the case of metal pipes, the inner diameter corresponds to the DN. Flow value data are for tubes whose internal diameter corresponds to DN.

Cable length2000mm

Calibration force	cable
8 gr	2m

Our Advantages

Product Display

Recommend Products

Exhibitions

Certifications

Company Profile

JPCI Controls originated from the French family-owned company founded in 1972, our company was founded in 2000, headquartered in Gaoming District, Foshan City, Guangdong Province, China, which is specialized in the design and production of mechanical thermostats, safety devices and electric heating systems for domestic and industrial use. JPCI owns an internationally renowned brand, ULTIMHEAT, and has a subsidiary in Lyon, France.After more than 50 years of development, JPCI has become a research and development enterprise which is deeply exploring the international market.
 

JPCI Controls covers an area of 30,000 square meters, has more than 300 employees, including 30 professional R & D and laboratory employees, and produces more than 6 million products per year, with more than 10,000 product models. Our production has achieved full vertical integration to ensure quality control at each stage, our company has more than 1000 sets of testing equipment such as ultraviolet aging testing machine, motor loading machine, hydraulic hi-pot bursting testing machine to strictly monitor product quality.
 

JPCI Controls has always adhered to the values of innovation, listening, responding and continuous improvement to ensure that products can achieve the best quality. JPCI holds 250 patents and applies for an average of 20 patents per year. Won the national high-tech enterprises and passed the system certification ISO9001, ISO14001, ISO45001; It has a 750 self-built laboratory and has passed the ISO17025 laboratory certification of TUV&UL.

 

JPCI Controls is driven by innovation, guaranteed by quality, and takes environmental protection as its responsibilitylooking forward to working with you to create a better future.