Fexibe Jacket Heater for Bc Container

• Customization: Available
• After-sales Service: Return and Replacement
• Warranty: 1
• Model NO.: 9vj
• Type: Casting Heating Equipment
• Certification: CE, ISO, RoHS
• Brand: Jpci
• Selling Units: Single Item
• Temperature: 20-125c
• Logo/Pattern: Laser Printing, Inkjet Printing
• Thickness: 20mm
• Container: IBC
• Marketing Type: Ordinary Product
• After Warranty Service: Online Support
• Top Cover: Not Included
• Specification: 111X43X43. cm
• Trademark: JPCI
• Origin: China
• Package Size: 111.00cm * 43.00cm * 43.00cm
• Package Gross Weight: 3.000kg

Product Description

Product Description

Specification

item	Value
Place of Origin	Guangdong,China
Brand Name	JPCI,ULTIMHEAT
Container	IBC
Tigthening	Nylon straps and metal buckle
Temperature	20-125
Others size	Not in stock
Thickness	20MM

REMARK : WE ALSO HAVE MODEL 20L 30L IN STOCK, for more optionsplease do kindly contact us.

 

Main Features

Thanks to its two miniature electronic thermostats, adjustable by knob from 20 to 125°C, this series of flexible jacket heaters with 2 heating zones with 2 independent temperature controls are used for antifreeze protection, reheating, temperature stabilization, to reduce viscosity or to melt soaps, animal or vegetable fats, varnishes, oils, food or chemical products.
This series of jacket heaters is the most economical solution, with for heating at a set temperature 1000 liters bulk containers (IBC) of 1m x 1.20m and height 1m. For heating half empty containers, it is possible to heat only the lower zone. The jacket heater covers the entire surface and is surmounted by a soft collar (Scarf) preventing sliding down.
They are made with three power levels: (0.05W/cm² for temperature up to 50°C, 0.1W/cm² for temperature up to 80°C, and 0.135W/cm² for temperature up to 110°C. Their thickness of insulation is 20mm. In these models the surface temperature is limited to 135°C.
They can therefore be used on full metal 1000 liters IBC, and provided that the set points of the electronic regulators are set at sufficiently low temperatures, on plastic containers. When they are used with an insulated lid and an insulated pedestal, their energetic efficiency can rise 90%.

 

Technical characteristics

The heating element of the flexible jacket heater consists of a network of silicone insulated heating wires shielded by a metal braid, taken under a cover sewn in PU and Teflon coated polyester fabric. A 20 mm thick, temperature-resistant NBR-PVC foam insulation is inserted between the heating network and the outer wall. This insulating foam has an insulation coefficient (Lambda
λ) of 0.039W/m.K, and this makes it possible to divide the energy losses by 3 compared to jacket heaters insulated with mineral wool or carbon fiber felt of the same thickness. Adjustable metal buckles allow quick assembly and disassembly and efficient clamping on the container. Their mechanical strength is exceptional.

Fabric covering:
- Internal heating face: Teflon coated polyester fabric,
- External side: waterproof PU coated polyester fabric.

Thermal insulation:
NBR-PVC foam, with closed cells and high temperature resistance, thickness 20mm.
Heating element:
Silicon insulated heating wire with metal braid providing mechanical protection against puncturing and good grounding.

Temperature control:
Each of the 2 heating zones has its own electronic thermostat adjustable from 20 to 125°C, located in a waterproof box mounted on
the external surface of the jacket heater. It controls the temperature by means of a thermistor probe placed on the inner surface
of the fabric in contact with the container. This probe has an anticipation loop avoiding overheating. Each of the 2 heating zones
has also its own temperature limiter, incorporated in the heating net to limit the surface temperature to 135°C.
Connection cable:
Each of the 2 heating zones has its own rubber insulated power supply cable, for industrial environments, 3x1.5mm²,length 3m, with
Euro plug. UL plug on request.

Mounting on containers:
These jacket heaters feature nylon straps with quick-release adjustable buckles for adjustment to the diameter of the container,
and a soft fabric collar without thermal insulation named scarf. This flexible scarf can be used to hold in place an insulating
lid in the case of cylindrical containers.

Options:
- Electronic thermostat temperature range -40+40°C, 30-90°C, 30-110°C
- Power supply 110/115V
- Power cord with industrial plug 2-pole + earth 16A CEE (IEC60309)
- Lids and insulating pedestals: see the accessories pages.
Compliance with standards: CE compliant. TUV certificate for EEC Low Voltage Directive (LVD) and EMC directive 2004/108/EC, and CE
marked accordingly.

Main references (see the technical introduction for the liquids heating time)
* For these products supplied with UL plug and not Euro plug, replace the 15th character by X.

 

FAQ

1. Who are we?
We are the manufacturer with French technology and investment.

2. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.What can you buy from us?
The whole range of the heaters & controlsThermostats,pressure switches,level switches,flow switches,heaters

4. Why should you buy from us not from other suppliers?
Our company is ISO9001-2000 and ISO14001 international quality/environmental system certified and matches the most demanding foreign customer inspections.

5. What services can we provide?
Accepted Delivery Terms: FOB,EXW
Accepted Payment Currency: USD,EUR, HKD, CNY;
Accepted Payment Type: T/T;
Language Spoken:English,Chinese

Packing&Shipping

Option : By Aliexpressplease kindly do select the shipping method by yourself.

Company Introduction

Company profile:

Established in China since 2000, with French technology and investment, our company is proud to have more than 60 years experience in manufacturing electromechanical components and 30 years experience in manufacturing safety component for Spas, swimming pools and hot tubs. This experience, combined with high tech equipment and high tech raw materials let us develop the new components needed by rapid expansion of Asian and Chinese market.
In our new factory, on more than 8000 square meters production lines, we have two manufacturing divisions:
Division one is producing components:
Thermostats, energy regulators pressure switches, level switches, flow switches, fire detection fusible links, heating elements and ceramic connection blocks.
Division two is producing complete assemblies and sub assemblies on customer specifications:

Swimming pools heaters, heat pumps backup heaters, spas heaters, small water heaters, immersion heaters, aluminum foils heaters, baseboard and convection heaters sub assemblies
Our R&D team develops new products upon customer specification, taking care of international safety standard (UL, CE, etc.).
We produce our own stamping, bending, plastic injection, zinc alloy injection, and machining.
We are equipped with up to date automatic and CNC TIG welding and laser welding equipment and ultrasonic welding checking.
We have our own climatic room, corrosion testing loops, salt spray testing, and more than 30 specific equipments for products life testing.
Our income quality control laboratory is equipped to check raw material (plastics, metals) physical characteristics and dimensions.
Our finished product control laboratory has more than 200 machines to calibrate and check temperature, pressure, level and flow controls.
From the raw material to the finished product we control every production step. Meet your control equipment demand rapidly and safely is our consistent promises.

Basic Information

Product/Service Sell: Flow switches, level switch,pressure switch, thermostat,heating elements, back up heaters for heat pumps

Number of Employees:200 to 300 People
Main Markets:North America/South America/Eastern Europe/Southeast Asia/Africa/Oceania/Mid East/Eastern Asia/Western/Europe/Northern Europe/Southern Europe/Domestic Market

Total Annual Sales Volume: US$2.5 Million - US$5 Million

Exhibition

Domestic : China Heat Pump Exhibition ,Shanghai city , 15th-17th March every year 

Oversea : It depends,normally in Europe,