Immersion Heating Tubes Heating Elements with Thermostat and Manual Reset Thermostat High Power Multiple Terminals Heater

• Customization: Available
• Certification: RoHS, CCC, ISO9001, CE
• Type: Electric Coil
• Model NO.: 9st
• Material: Ni-Fe
• Form: Heating Wire
• After-Sales Service Provided: Return and Replacement
• Selling Units: Single Item
• Housing Material: Plastic
• Storage/Tankless: Instant/Tankless
• Application: Commercial
• Installation: Freestanding
• Power (W): 3500
• Length (mm): 500
• Voltage (V): 400
• Power: 3500W
• Specification: 1.000 kg
• Trademark: JPCI
• Origin: China
• HS Code: 8516109000
• Production Capacity: 50000

Product Description

 

Main applications: liquid heating, hot water circuits, containers and buffer tanks.
These heaters are specifically designed for domestic and commercial hot water tanks, as well as auxiliary heating systems of solar energy buffer tanks, and auxiliary heaters for heat pumps.
The housing is offset by 30mm for tank thermal insulation.
They exist in:
- 5 standard power levels: 1kW - 1.5kW - 2kW - 3kW - 3.5kW
- 2 types of standard fittings: 1"1/2, M45x2
- 2 types of surface load density: 5W/cm² and 10W/cm². See technical introduction to optimize the surface load.
The 5W/cm² surface load can meet the recommendations of the "NFC Performance" Standard, Class C (LCIE 103-14), for storage water heaters.
Heater tube material: 8mm dia. AISI 304 or Incolloy 800 (AISI 316; AISI 321; Incolloy 825 on request).
Fitting material: brass, swiveling on housing, brazed on tubes. Supplied without gasket and without nut. See accessories below.
Thread: 1"1/2 BSPP (ISO 228), and metric thread M45x2.
Enclosure: IP54, 105 × 88 × 84.5mm, (Cap, accessories and cable gland not included), black PA66, fiber glass reinforced.
Product including an adjustable temperature control thermostat and a fixed setting high limit manual reset
thermostat. Manual reset has access from outside, by removing a screwed cap.
Electrical input: One M20 cable gland in PA66. A second hole for M20 cable gland is closed by a cap.
Temperature Adjustment: Inside, with °C printed knob. (°F printed knobs available in option)
Thermowell: One thermowell in AISI304, dia.10mm
Standard set point adjustment ranges:
- 30-90°C (85-195°F) with manual reset at 100°C (212°F)
- 0-60°C (32-140°F with manual reset at 80°C (176°F)
Electrical connections:
- Power supply (Neutral, Line, Ground), on 6mm² screw terminals.
- Immersion heater: 3 wires, FEP 180°C insulated, 2.5mm², equipped with ring terminals, length 50mm on the immersion heater connection side, for direct connection on heating elements M4 terminals.(Neutral wire is blue color)
- Pilot light: can be connected by a strap on power supply, or on control thermostat output, or on safety thermostat output.
Support grid: 1 grid AISI 304 for lengths from 400 to 600mm, 2 grids above.
Not heating immersed zone: 50mm.
Surface load: standard 5W/cm² or 10W/cm², other values on request.
Voltage: 220-240V single phase only.
Standard options:
- Thermostat knob accessible under the cover by a M32 removable cap.
Variants on request:
- 4-40°C (40-105°F), 30-110°C (85-230°F) thermostats.
- Liftable adjustable high end adjustment on control thermostat.
- TIG welded fitting.

Exhibitions

Company Profile

JPCI Controls originated from the French family-owned company founded in 1972, our company was founded in 2000, headquartered in Gaoming District, Foshan City, Guangdong Province, China, which is specialized in the design and production of mechanical thermostats, safety devices and electric heating systems for domestic and industrial use. JPCI owns an internationally renowned brand, ULTIMHEAT, and has a subsidiary in Lyon, France.After more than 50 years of development, JPCI has become a research and development enterprise which is deeply exploring the international market.
 

JPCI Controls covers an area of 30,000 square meters, has more than 300 employees, including 30 professional R & D and laboratory employees, and produces more than 6 million products per year, with more than 10,000 product models. Our production has achieved full vertical integration to ensure quality control at each stage, our company has more than 1000 sets of testing equipment such as ultraviolet aging testing machine, motor loading machine, hydraulic hi-pot bursting testing machine to strictly monitor product quality.
 

JPCI Controls has always adhered to the values of innovation, listening, responding and continuous improvement to ensure that products can achieve the best quality. JPCI holds 250 patents and applies for an average of 20 patents per year. Won the national high-tech enterprises and passed the system certification ISO9001, ISO14001, ISO45001; It has a 750 self-built laboratory and has passed the ISO17025 laboratory certification of TUV&UL.

 

JPCI Controls is driven by innovation, guaranteed by quality, and takes environmental protection as its responsibilitylooking forward to working with you to create a better future.