Rtical-Mount Flow Switch Calibration Adjustments for Paddle Weight in Any Position

• Customization: Available
• IP Rating: IP65
• Certification: RoHS, ISO9001, CE
• Model NO.: R1B
• Type: Infrared Water
• Media Type: Liquid
• Operating Temperature: 5~80c
• Selling Units: Single Item
• Switch Actuation: Sensor
• Cable Length: 500-3000mm
• Material: Polypropylene,Plastic
• Rated Voltage: 250V
• Ype: Magnetic Flow Switch
• Flow Rate: 15~63
• Electrical Rating: 3A Resistive,250V AC
• Electric Contact Type: Spdt,Open or Close by Flow Rise
• Nominal Pressure at 20c: 1MPa (Pn10)
• Connection Type: Threaded
• Frequency: 60Hz,50Hz
• Application: Monitor Liquid Flow,Flow Sensor,Water Pump Contr
• Specification: 4.3X3X11.68. cm
• Trademark: Ultimheat
• Origin: Guangdong, China
• Production Capacity: 50000
• Package Size: 4.00cm * 4.00cm * 16.00cm
• Package Gross Weight: 0.500kg

Product Description

vantage	Liquids temperature range: 5 to 80°C
vantage	Paddle shaft: Titanium
vantage	3A resistive, 250V AC

Main uses: Water flow detection on water pipes

Functional principle: Balanced paddle, perpendicular to the main flow, actuating a micro-switch. Flexible elastomeric gasket between paddle and electric switch

Main housing material: PPO, fiber glass reinforced, usable with potable water.

Paddle material: Polypropylene, resistant to ozone and water disinfection products

Paddle gasket: Santoprene, resistant to ozone and water disinfection products

Electrical rating: 3A resistive, 250V AC

Electric contact type: SPDT, open or close by flow rise

Liquids compatibility: For use with clean water and liquids without chemical incompatibility with PPO and Santoprene

Nominal pressure at 20°C: 1MPa (PN10)

Nominal diameter: Can be used on 32 to 63 mm internal diameter pipes

The paddle is cleavable and can be cut at various lengths upon pipe diameter. There are cutting lines numbered 1 to 9 every 5mm.

Recommended mounting position: Vertical, with paddle downside. Other positions are possible with a change in the calibration value related to the paddle weight.

Water pipe connection: Male thread ½"(BSPP) and NBR gasket. Must be used on a BSPP ½" female fitting perpendicular to the main pipe.

Recommended torque: 7Nm

Liquids temperature range: 5 to 80°C

Ambient temperature range: 5 to 50°C

Ingress protection: IP65

Electrical connection: 3 × 0.75 mm² cable, PVC insulation, style H05VVF. 2 ways connection block on models with enclosure.

Installation instructions:

- Check carefully the paddle orientation: The arrow on housing must be exactly parallel to the pipe

- A 5 mm minimum gap must be respected between end of the paddle and tube wall opposite to the ¾" fitting.

- We recommend the use of nozzles of length less than or equal to 18mm between the gasket seat and the inside of the tube and with an inner diameter greater than or equal to 20mm, to avoid blocking of the pallet

Accessories: ½" female PVC saddles for DN40 to DN100 (OD) PVC pipes, and other fittings: see section 8 of this catalogue.

Options: cable with connector or terminals, other cable length, paddle type B (see type R1B)

 

Cable length1500mm

 

Recommend Products

Why Choose Us

Certifications

Company Profile

JPCI Controls (Foshan Gaoming) Co., Ltd originated from the French family-owned company founded in 1972, our company was founded in 2000, headquartered in Gaoming District, Foshan City, Guangdong Province, China, which is specialized in the design and production of mechanical thermostats, safety devices and electric heating systems for domestic and industrial use. JPCI has won honors such as National High-tech Enterprise, Specialized and New Enterprise, and Engineering Technology Research Center.

JPCI owns an internationally renowned brand, ULTIMHEAT, and has a subsidiary in Lyon, France. After more than 50 years of development, JPCI has become a research and development enterprise which is deeply exploring the international market.

JPCI Controls covers an area of 30,000 square meters, has more than 300 employees, including 30 professional R & D and laboratory employees, and produces more than 6 million products per year, with more than 10,000 product models.

Our production has achieved full vertical integration to ensure quality control at each stage, our company has more than 1000 sets of testing equipment such as ultraviolet aging testing machine, motor loading machine, hydraulic hi-pot bursting testing machine to strictly monitor product quality.

JPCI Controls has always adhered to the values of innovation, listening, responding and continuous improvement to ensure that products can achieve the best quality. JPCI holds 250 patents and applies for an average of 20 patents per year. It has passed the system certification ISO9001, ISO14001, ISO45001; It has a 750 square meter self-built laboratory and has passed the ISO17025 laboratory certification of TÜV&UL. It has also passed the GB/T3836.21 and IEC 80079-34:2018 Quality System certification for explosion-proof equipment manufacturers.

Exhibitions

Product packaging

 

FAQ

QWhere is your factory located? Can I conduct a factory audit?
Our factory is located at No. 10 Pengshan Road, Gaoming District, Foshan City, Guangdong Province, China. We have two manufacturing plants covering an area of 30,000 m2. Of course, you can conduct a factory audit. You are welcome to visit us at any time.

QWhat pre-sales and after-sales services do you offer?
Our pre-sales services include discussing product parameter details and product drawings. If customization is required, we will arrange for engineers to connect with you. We will also discuss price, delivery methods, delivery times, and logistics with you.After-sales services include communication to understand production batches and delivery times. We will not be responsible for issues caused by improper operation. If it is our fault, our after-sales service can provide exchange services, and the warranty period for products is calculated as one year from the date of delivery.

QCan I customize products? What is the customization process?
Yes, we can customize products, and we have R&D engineers to assist you. The customization process is as follows: determine product parameters -> make product drawings -> confirm the prices of products and related molds -> make 3D drawings of products ->make samples -> test various data -> ship.

QWhat is your sample policy?
We support chargeable samples, and the logistics costs will be determined based on the number of samples; we can discuss the specific costs in detail.

QCan I place a small batch order?
Yes, we support small batch orders. Most products allow orders of 5 to 10 pcs for sample testing. Additionally, depending on the product, we support small batch orders ranging from 30 to 500 pcs.

QWhat is your delivery time?
Different products have different delivery times. For small orders with products in stock, we can generally deliver within 7 to 15 days. The specifics will be communicated during the pre-sales service.