Paddle Flow Switches with Reed Switch Contact 1/2 Male Thread Liquid IP65 Titanium Max 1amax 70W Max 250V

• Customization: Available
• IP Rating: IP65
• Certification: RoHS, ISO9001, CE
• Model NO.: R1S R1f
• Type: Infrared Water
• Media Type: Liquid
• Operating Temperature: 5 to 80c
• Selling Units: Single Item
• Cable Length: 500mm
• Main Housing Materia: Polypropylene
• Paddle Shaft: Titanium
• Flow Rate: Optional
• Electrical Rating: Max.1A Max 70W Max 250V
• Voltage: 250VAC
• Application: Flow Detection
• Size and Pressure: DN25;Pn10
• Specification: 3X3X7.8cm
• Trademark: JPCI
• Origin: Guangdongchina
• HS Code: 8536500090
• Production Capacity: 50000

Product Description

 

Product Description

Item No.	R1S (1/2" BSPP) R1F(1/2" NPT)
Contact	Reed switch
Size   & Pressure	PN10   &  DN ≥25
Electrical  rating	≤1A & ≤ 70W & ≤250V

 

Detailed Images

 

 

 

Main uses: The most simple flow switch with magnetic pull-back. Recommended mounting position is on horizontal pipes, but can be mounted in any position. For water flow detection on dia. 25 to 63 mm water pipes. Functional principle: Balanced magnetic paddle mounted perpendicular to the flow and activating a reed switch through the wall. The return of the paddle is by made by magnetic action, without spring. No seal or liquid can pass between the piping system and the electrical contact. Suitable for corrosive water pools and spas and salination chlo-rination and bromination systems. Must not to be used for water containing magnetic particles or high viscosity liquids, which block the movement of the paddle. Adjustment: Can be adjusted by cleaving the paddle Main housing material: Polypropylene, resistant to ozone and water disinfection products, usable with potable water. Paddle: Polypropylene, 13 mm width Paddle shaft: Titanium, providing an outstanding corrosion resistance, and improved mechanical live Electrical rating: Max 1A, Max 70W, Max 250V, resistive load. Use on inductive circuits reduces electrical rating. We recommend to protect the reed switch with contact protection device when used in inductive loads Electric contact type: Normally open, closes by flow rise Liquids compatibility: For use with clean water and liquids without magnetic particles and without chemical incompatibility with polypropylene and titanium Nominal pressure at 20°C: 1MPa (PN10)

Nominal diameter: Can be used on 25 to 63 mm internal diameter pipes. The paddle is cleavable and can be cut at various lengths upon pipe diameter. There are cutting lines numbered 1 to 6 every 5mm. Recommended mounting position: On horizontal pipes. Mounting in other positions slightly modify the calibration Water pipe connection: On female ½" fitting. On the type with BSPP thread, a NBR gasket is supplied with the product. On the type with NPT thread, thread sealant must be used. Recommended torque: 7 Nm Liquids temperature range: 5 to 80°C Ambient temperature range: 5 to 50°C Ingress protection: IP65 Electrical connection: 2 x AWG24 (0.2mm²) cable, PVC insulation, T80°, style UL2464. Installation instructions: - Check carefully the paddle orientation: The arrow on housing must be exactly parallel to the pipe - A 5 mm minimum gap must be respected between end of the paddle and tube wall opposite to the fitting. - We recommend the use of nozzles of length less than or equal to 18mm between the gasket seat and the inside of the tube and with an inner diameter greater than or equal to 20 mm, to avoid blocking of the paddle. Accessories: 1/2" PVC saddles for DN40 to DN100 (OD) PVC pipes, and other fittings: see last section of this catalogue Options: cable with connector or terminals, other cable length

Thread	Cable length
		500mm	1m	2m
1/2" BSPP	R1S6D4771F45P050	R1S6D4771F45P100	R1S6D4771F45P200
1/2" NPT	R1F6D4766F25P050	R1F6D4766F25P100	R1F6D4766F25P200

Packing&Shipping

Exhibitions

Certifications

Company Profile

JPCI Controls originated from the French family-owned company founded in 1972, our company was founded in 2000, headquartered in Gaoming District, Foshan City, Guangdong Province, China, which is specialized in the design and production of mechanical thermostats, safety devices and electric heating systems for domestic and industrial use. JPCI owns an internationally renowned brand, ULTIMHEAT, and has a subsidiary in Lyon, France.After more than 50 years of development, JPCI has become a research and development enterprise which is deeply exploring the international market.
 

JPCI Controls covers an area of 30,000 square meters, has more than 300 employees, including 30 professional R & D and laboratory employees, and produces more than 6 million products per year, with more than 10,000 product models. Our production has achieved full vertical integration to ensure quality control at each stage, our company has more than 1000 sets of testing equipment such as ultraviolet aging testing machine, motor loading machine, hydraulic hi-pot bursting testing machine to strictly monitor product quality.
 

JPCI Controls has always adhered to the values of innovation, listening, responding and continuous improvement to ensure that products can achieve the best quality. JPCI holds 250 patents and applies for an average of 20 patents per year. Won the national high-tech enterprises and passed the system certification ISO9001, ISO14001, ISO45001; It has a 750 self-built laboratory and has passed the ISO17025 laboratory certification of TUV&UL.

 

JPCI Controls is driven by innovation, guaranteed by quality, and takes environmental protection as its responsibilitylooking forward to working with you to create a better future.